Gaui X7 3X Pro v3

Starting at: $1,989.99

  • Model: PS1-3XPROv3-X7
  • Shipping Weight: 8.75lbs
  • Manufactured by: PhotoShip One

Please Choose:





Add to Cart:


 The X7 700 3X Pro v3 is a front mounted camera system for the Gaui X7. It comes with a 3 axis 3X Pro v3 camera gimbal for roll, pan and tilt camera motion. It also includes all necessary mounting hardware, extended length landing gear set, and battery boom mount. The camera gimbal can accommodate cameras as large as some full frame DSLR's. (Similar in size to a Nikon D300 or Canon 5D). It can also accept smaller point and shoot type cameras or HD video cameras.


The Lower camera gimbal plate is multi-position adjustable in the vertical axis to allow the pivot point of the plate to line up with the camera center of gravity. This is important when using the Inertial Stabilizing system or gyros.

Even though the Gaui X7 3X Pro v3 has built in vibration isolation it is still VERY important that your helicopter be as vibration free as possible if you plan to use this system for video shooting. This can mean you may spend several hours fine tuning your helicopter. For still photo shooting this is much less critical.

Continuous rotation servos come pre-installed in the roll, pan and tilt axis.  They are 360 rotation servos and do not respond like typical proportional servos.  Continuous rotation servos operate in "Rate Mode", meaning the rate at which the output wheel rotates is proportional to the amount of stick deflection on the transmitter.  If you move the stick all the way to one direction the servo will rotate continuously at maximum speed.  If you move the stick 50%, the servo will rotate at about half speed.   When you let the stick go the servo stops.  It DOES NOT return to any set position like a proportional servo.  This may take a bit of getting used to if you have not used continuous rotation servos but once you understand how they work it is rather easy to operate.





Also we'd like to mention that the 3X Pro v3 front mount systems are best operated by a second person and not the pilot.  Flying the helicopter is difficult enough let alone trying to operate a pan/tilt gimbal at the same time.  It is recommended that a separate camera operator man the controls of the camera gimbal.



SPECIFICATIONS:

Weight 1.8lb.
Cameras up to 6.0lb
5:1 gear ratio on pan/tilt axis
4:1 gear ratio on roll axis

This is not only the 3X Pro gimbal, this item comes with FMTS front tube mount system for the Gaui X7 as well as battery boom mount and extended length landing gear set. The Gaui X7 helicopter kit is NOT included but we do have them available as well.

 




Please allow up to 7-10 days for the item to be custom built and ship from our facility.


We also offer a high performance servo upgrade as an option.  The servo upgrade substitutes the standard plastic servos for titanium gear servos.  The  servos offer 3x the torque and 2x the speed over the standard servos. This option is $299.95. You may add this option at the top of this page when adding to cart.


  
 


This product was added to our catalog on Friday 15 March, 2013.